Basic Snowflakes - Patterns for Beginners

Snowflake #2 - Only four different kinds
of shapes are needed to create this
colorful snowflake - detailed pattern for
this flake to be posted soon on Craftsy.

As I mentioned in previous posts, I've taught some workshops recently for beginning quillers.  To support those workshops, I created a couple of patterns for easy snowflakes using just basic shapes.  I'm going to generate some nice write-ups for these and post them for free on Craftsy.  I'll let you know when I do that.  But in the meantime, what with all this snow so far this winter, I thought I'd put the general writeup for the first and easiest snowflake pattern right here.

Snowflake #1 - You will need:

• Paper Strips – 12 strips of paper, each 8 inches long.
• White craft glue.
• Wax paper is good to have, but not necessary.
• A toothpick can help apply tiny dabs of glue.
• A quilling tool or toothpick if that’s how you like to roll up your paper quills.

Step One: Get Ready

Work on a flat surface where you can leave your quilling overnight to dry.  If you have it, put a piece of wax paper over the pattern (Snowflake #1 - Pattern, below).  As you make your quills, you can arrange them right over the pattern.  Put your paper strips and glue nearby.

Loose coil shape.  Diamond shape.  Teardrop shape.

Step Two: Make Quills 

Snowflake #1 pattern requires:

- Six (6) Diamond Shapes, any color you like.
- Six (6) Teardrop Shapes, any color you like.

To begin, check out the paper quilling tutorial on Craftsy to learn how to start quilling.  It shows the initial steps, and then how to make basic shapes.  You will want to start by making a loose coil shape, and then pinching it to create one of the two other shapes shown here.  Practice making these shapes until you like what you see.  Then to create Snowflake #1, make six diamond shapes and six teardrop shapes.

Snowflake #1 - Pattern

Your shapes may be bigger or smaller than those in this pattern, depending on if you quill with your fingers or a quilling tool, and how big you let your quills expand before you glue them.  It’s okay if your quills are a different size, just use the pattern as a guide.

Step Three: Arrange and Glue Quills:

Following the pattern, take the six diamond shapes and glue them together to form what looks like a six pointed star.  Give this a few minutes to dry.   Then take the six teardrop shapes and glue them to the star with the points facing outwards.

Step Four: Finish

Let the snowflake dry overnight. Remove it carefully from the background, since if you used a bit too much glue, it may stick.  Then use some string or ribbon to hang!

Image Credits: Snowflakes, my pix of my own snowflakes. Close-up of loos coil, diamond, and teardrop shapes used from http://www.naqg.org/accreditation/NAQGshapeChartFinal2010.pdf

Book Review: Quilling For Beginners

Quilling for Beginners by Jean Woolston-Hamey.  Published by Kangaroo Press, Simon and Schuster, 2004.  48 pages.

I rate it ... fair!

2.0/5.0

See my post about book reviews for details about my review criteria and biases.

I'm always concerned when I put up a less-than-stellar review of any product.  I'm well aware of the time and energy that goes into a creating a book, being an author myself.  But if one can't post an honest review of one's opinion, then what is the point of a review?  As always, this is only my opinion, and that of others may differ widely.

This is a relatively short (48 page) quilling book that introduces the art of quilling to beginners, and provides a few easy projects for them to try.  It ends with a gallery of those same projects done by children.

What I liked:
The book has nice, bright color images of projects.  My copy came with a small package of paper strips on the inside back cover, so a few projects could be tried immediately.

What liked less:
The tutorial for beginners is much too short, and misses out on some important techniques such as making roses.  Some potential resources and supplies are not mentioned that are standard in other books, such as fringers, molds and such.  The overall quality of the quilling in the projects is not high, showing uneven tension and very large open centers.  The projects themselves are not terribly interesting, and I don't think they will inspire children or adults to try the craft.  There is no history section, and the gallery space could have been used better with a few more advanced projects, rather than showing children's work.

Overall, as a collector, I felt compelled to buy it.  But for a beginner, there are much better quilling books on the market.

Poinsettia Flower Ornament Revisited

As you know I posted the directions for my Poinsettia Flower Ornament here on the blog a few weeks ago.  (I had also created directions for my Halloween Sampler, and posted that up at Craftsy for a fee.)  It occurred to me that the directions for the simple poinsettia flower might be a nice thing to post for free, so that's what I did.

I am astonished to say that the Poinsettia Flower Instructions have been downloaded from Craftsy more than a hundred times already!  This means a couple of things to me - people really like free patterns (of course) but also, that there is a demand for really simple quilling patterns.  I am surprised, actually, but it has been ages since I was a beginner at quilling.  I'm having a little trouble imagining what it is like ... especially since there was no internet nor computers when I first started.  I learned all my material from books or from patterns I purchased.

These days, of course people are turning to the internet before anything else.  Why buy a potentially expensive book when you can download patterns for free, and get all your instructions on free videos from various sites?  Seems like a smart way to start and see if you like a craft before making more of an investment in time and money.

So I'll be thinking of ways to post other, small, free patterns and hope they are as useful and popular as the poinsettia!  I wish I had written down the directions for my candy cane when I made it.  I'll have to be more thorough when I make new pieces - someone else might want to make them, too!

Halloween Sampler - Projects #2 and #3

Here is the next installment of the Halloween Sampler Instructions!  This covers projects 2 and 3 (out of nine).  I've already posted the general instructions, the mat board cutting instructions, as well as project #1 and a bonus project!

First post -  Halloween Sampler
Second post - General Instructions and Mat board
Third post - Bonus Project and Project #1

And remember, if you want to download all the instructions right now in one go, then head over to Craftsy where I have them posted for $3.99.

Project #2: Frightening Ghost

Materials:
- light grey, 9 strips at 6” long (body)
- light grey, 2 strips at 4” long (body)
- light grey, 1 strip at 10” long (head)
- light grey, 2 strips at 8” long (arms)
- black, 2 strips at 2” long (eyes) – 1/16” narrow strip
- black, 1 strip at 4” long (mouth) – 1/16” narrow strip
- grey, 4 strips at 6” long (fog)

Take the nine strips of light grey 6” long and make long diamond shapes. Take the two strips of light grey at 4” long and make two teardrops. Also make teardrops out of the two 8” long light grey strips, curving the teardrops slightly at the ends. Make another teardrop from the 10” long light grey strip. Glue these together as shown to form the ghost.

For the face, create three circles from the narrow black strips, and use the larger circle for the mouth. Glue these onto the ghost.

For the ‘fog’ use 4 strips of a slightly darker color of grey. Make very long “S” coils from each of these. Glue two of the “S” shapes together as shown for the lower border, and two other “S” shapes together for the side border. Glue these together where they touch.

The ‘fog’ is of course optional. If you are choosing to put your projects into the sampler, then you may want the fog to help ‘frame’ the projects. Each of the four projects in the corners of the mat board have an element that helps to frame them.

Glue these pieces into the mat board, right column bottom square.

Project #3: Jack-O-Lantern

Materials:
Jack-o-Lantern
- orange, 1 strip at 14” (large pumpkin)
- orange, 2 strips at 16” (large pumpkin)
- orange, 2 strips at 18” (large pumpkin)
- light brown, 1 strip at 4” (large stem)
- olive green, 1 strip at 3” (leaf)
- olive green, 1 strip at 2” (corkscrew vine)
- black, 2 strips at 4” long (eyes)
- black, 1 strip at 3” long (nose)
- black, 3 strips at 2.5” long (mouth)
Border
- olive green, 2 strips 3” (leaves)
- olive green, 2 strips at 4” (leaves)
- olive green, 2 strips at 4” (vines)
- light brown, 1 strip at 2” (small stem)
- olive green, 1 strip at 1” (corkscrew vine)
- orange, 1 strip at 4” (small pumpkin)

The pumpkin is made of bright orange, five strips, one at 14", two at 16", and two at 18". Take the 14” strip and make an ‘eye’ shape. Take the other long orange strips and make crescent shapes. Glue the shorter crescents to the eye shape, and then glue the longer crescents to form the outside of the pumpkin, as shown.

The stem is light brown at 4" long, formed into an asymmetrical square shape. Make the leaf shape from the olive green 3" strip. Use a toothpick or quilling tool to help form the corkscrew vine from the 2" of olive green. The face is made of black strips, all triangles, with eyes of 4" long, nose 3", and three teeth at 2.5" each. Glue together as shown.

The vines are long “S” shapes, each 4" of olive green. Make all four leaves, and glue the smaller 3” leaves closer to the middle of the vines. Glue the longer 4” leaves to the ends of the vines.

The small pumpkin is a somewhat flattened circle made from one 4" bright orange, strip. It has a tiny square stem made from the 2" light brown strip, and a coil of 1" olive green.

As you see from the photo, the ‘vines’ and the small pumpkin are not attached, but are separately glued to the white background. The jack-o-lantern is framed nicely by the vines. Glue these pieces into the left column, into the square at the bottom left corner.

Quilled Halloween Sampler

I've been considering making a sampler of quilled Halloween projects for a long time.  I love Halloween, and often use small designs and motifs on place cards, tags, ornaments, wall art, and more.  I've never bothered to actually write down any of my designs before - so they come out differently every year, AND I have to spend extra time and paper trying to figure out what I did the last time around :)

So this year I spent the time and effort to record all my paper widths, lengths, and shapes as I worked.  I also took a few pictures of the intermediate stages as I went along.  I realized when I was close to finished that I might not be the only person who would like to use the directions.  So to make up some of the resources I used, and to cover some of the time (it took a loooong time to write this up), I decided to post all the instructions for a fee over at Craftsy.  So if you are in immediate need of some ideas for Halloween, look no further!  You can download all 16 pages of Halloween packed PDF for $3.99.

OR if you can wait, and don't have the extra $$, then keep your eyes here on the blog.  I'm going to post all the instructions in pieces right here between now and Halloween!

Here's the blurb from over at Craftsy:

The Quilled Halloween Sampler Instructions will tell you how to make nine different small Halloween themed projects (plus a bonus project!). The 16 pages are packed with pictures and ample details of paper quilling for you to recreate the sampler, or use it to come up with your own scary ideas!

These spooky designs can be used together to form a framed Halloween sampler group, or they can be used separately on greeting cards, gift tags, place settings, ornaments, wall art, or in whatever way suits your fancy! You can be creative and detour from the exact directions whenever it suits you and your project needs.

Some of the projects are very quick, while others are a little more involved, so you can fit the projects to the time you have available. Most of the designs are suitable for someone who knows the basics of paper quilling (beginner), while a few others are suitable for an intermediate level of quiller.

Most of the designs and motifs will be familiar, like bats and pumpkins, while others will be more unusual, like vampire fangs and skeleton keys. Let your creepy side out and enjoy some Halloween fun with the Quilled Halloween Sampler!